Product Selection Guide

With any water heater the trick is to make certain that you don’t run out of hot water in actual usage.

Once you run out with a storage water heater you have to wait a long time for it to heat up again. A Paloma continuous flow gas water heater can easily keep up with the demand.

Paloma gas water heaters provide the best option: ‘Continuous flow’, which accurately describes how it works. You never run out of hot water because unlike storage cylinder systems, it does not rely on pre-heating a quantity of water.

Calculating size

Four models of Paloma continuous flow gas water heater are available: 16, 24 and 27 litre external and 27 litre internal.  Each has a different flow rate measured in litres per minute.  Choosing the right one is based on desired water flow rate, the number of outlets it needs to support and the location of the water heater in your home. 

Unsure?
Don’t know which one is right for you?

Use our Product Selection Guide to help you select the perfect Paloma system for your requirements. This is a guide only and we do recommend consultation with your plumber/gasfitter prior to final selection.

Some things you need to consider when planning your installation are:

  • A source of power is needed
  • For best results, ideally locate your Water Heater as close to the kitchen as possible, taking into account clearances required
  • Your Water Heater must be installed by a NZ certified gas fitter

Interested in purchasing a Paloma product? Where to buy... Find Now